Hotbird 13G Satellite Frequencies and Updated Channel List Guide
As one of Eutelsat’s most powerful satellites equipped with the latest technology, Hotbird 13G is strengthening its broadcasting dominance over Europe, the Middle East, and North Africa. If you have pointed your dish toward the 13 degrees East orbital position, you have stepped into a world of thousands of digital channels, 4K broadcasts, and uninterrupted radio stations. However, to access this massive world of content, you need accurate frequency values, correct polarization settings, and up-to-date TP (Transponder) information.
What is Hotbird 13G? Technical Capacity and Coverage
Hotbird 13G is a high-efficiency communication satellite built with an all-electric propulsion system. Working in tandem with 13F at the 13° East position, it maximizes signal quality. The biggest advantage of this satellite is its very high signal strength (EIRP). This allows users, especially in Western regions, to receive crystal-clear images even with smaller satellite dishes (60-90 cm).
Most Watched Frequencies and Channel Groups
When Hotbird is mentioned, the first contents that come to mind are usually Italian (RAI, Sky Italia), Polish (Polsat, Canal+), and French broadcasts. Additionally, a large number of free-to-air (FTA) news channels and thematic content are located on this satellite.
Featured Updated TP Information:
- RAI Package (Italy): 10992 V 27500 2/3 (With HD and 4K options)
- Polsat Box: 11158 V 27500 3/4 and 12265 V 27500 3/4
- SRG SSR (Switzerland): 10971 H 29700 2/3
- News and International Channels (Euronews, TV5 Monde): 11034 V 27500 3/4
These frequencies are among the most stable signals from the satellite. When receiving broadcasts, you must ensure that your receiver supports technical details such as DVB-S2 and 8PSK modulation.
How to Set Up Hotbird 13G? Step-by-Step Guide
To receive a signal from the satellite, knowing the frequency is not enough; your hardware settings must also match these values.
- LNB and Dish Adjustment: Fine-tune the LNB skew according to the clock direction. For Hotbird, having the LNB cable output pointing slightly to the right (around the 4-5 o’clock position when facing the dish) optimizes the signal.
- Local Oscillator (LO) Setting: In the settings section of your satellite receiver, select the LNB type as “Universal” (9750/10600).
- Transponder Entry: Go to the manual channel search section. Enter the frequency
10992, theV(Vertical) polarization, and the27500symbol rate. - Network Search: If you activate this option, all other current transponders on the satellite will be automatically found and added to your list through the single frequency you entered.
Signal Problems and Troubleshooting
If you are receiving a “No Signal” warning on some frequencies, there could be several basic reasons. Hotbird 13G is quite powerful, but it may require fine-tuning during transition periods with 13F or in adverse weather conditions.
- FEC Value: Most modern devices select the FEC value automatically, but if you need to enter it manually, check values like 2/3, 3/4, or 5/6.
- Cable Quality: If you are experiencing loss especially in high-frequency broadcasts (above 12000 MHz), check the joints and corrosion on your cable.
- DiSEqC Setting: If you are using more than one dish (e.g., Türksat + Hotbird), make sure you correctly define which DiSEqC input (LNB 1, 2, 3, or 4) Hotbird is connected to.
Hotbird 13G continues to be the heart of digital broadcasting with its rich range of content. By following the updated frequency lists, you can instantly access a wide range of content from 4K documentaries to World Cup matches.
hotbird 13g frequency list 2026, eutelsat hotbird 13g channels, hotbird updated tp settings, satellite frequencies, hotbird 13f vs 13g, free hotbird channels, dbox frequency settings, 13 degrees east satellite setup, increase hotbird signal quality, lnb settings, hotbird 13g coverage map, rai frequency hotbird, polsat current frequency, srg ssr hotbird setup, satellite dish alignment.