Tunisia’s Cultural Pulse: Watania 1 Frequency Guide and Viewing Manual
As the oldest and most prestigious state broadcaster in Tunisia, Watania 1—formerly known as RTT (Radiodiffusion-Télévision Tunisienne)—remains an indispensable source of news, culture, and entertainment for both locals and the Tunisian diaspora worldwide. In an era of digital transformation, the channel has maintained its relevance by offering high-definition broadcasts across several strategic satellites.
If you want to bring the spirit of Tunisia into your home with crystal-clear picture quality, you need the correct satellite parameters. In this guide, we break down the latest technical data from to help you tune in to Watania 1 without the hassle.
Which Satellites Carry Watania 1?
Watania 1 broadcasts over powerful satellites that bridge North Africa, the Middle East, and Europe. To ensure a stable signal, your receiver must be programmed with the following up-to-date parameters.
1. Eutelsat 7 West A (7.0°W) – The Primary Choice
This is the most popular satellite for viewers in the MENA region. It typically offers the strongest signal and the most reliable uptime.
- Frequency: 11658 MHz
- Polarization: Vertical (V)
- Symbol Rate: 27500
- FEC: 2/3
- Broadcast Format: DVB-S2 / 8PSK (HD Quality)
2. Arabsat 5C (20.0°E) & Badr Series
For those with dishes pointed toward the East, Watania 1 is also available on the Arabsat/Badr constellation. Keep in mind that signal strength on these satellites may vary depending on your specific geographic location and dish diameter.
Step-by-Step Installation: How to Add Watania 1 Manually
Don’t let technical jargon intimidate you. You can easily add the channel manually by following these steps:
- Access the Menu: Using your remote, press “Menu” or “Settings” and navigate to the Installation or Dish Setup tab.
- Select the Transponder (TP) List: Select the Eutelsat 7 West A satellite (or whichever you are using) and enter the “TP List” sub-menu.
- Add New Frequency: Press the “Add” button (usually the green or yellow button on your remote). Enter the frequency 11658, set the polarization to Vertical, and the symbol rate to 27500.
- Run the Scan: Once you see the signal quality bars turn green or blue, select “Search” or “OK” to begin the scan.
- Save and Enjoy: Once the scan is complete, Watania 1 will appear at the end of your channel list. You can then move it to your preferred position.
Troubleshooting: Why Am I Getting “No Signal”?
If you’ve entered the numbers correctly but still see a blank screen, consider these common fixes:
- LNB Settings: Ensure your LNB type is set to “Universal” and the 22kHz setting is on “Auto.”
- Dish Alignment: The 7.0° West position requires precision. Even a slight shift caused by wind or weather can result in signal loss.
- HD Compatibility: Watania 1 now broadcasts primarily in HD. If you are using an old SD (Standard Definition) receiver, it will not be able to process the DVB-S2 signal. Upgrading to an HD-capable receiver is necessary.
watania 1 frequency, tunisia tv channels, eutelsat 7 west a, arabsat badr, rtt tunisia, watania 1 hd satellite settings, channel frequency list, tunisian state television, manual channel installation, satellite receiver setup, 11658 v 27500, lnb settings, free-to-air arabic channels, middle east satellite frequencies